LEAP-S3

The main problems can often be solved by resetting to factory settings. Please note that your applications and settings will not be saved. You’ll need to reinstall your applications.

Go to “Settings” (gear icon),

OK / System / OK / About /OK / Reset / OK / Factory Reset / OK

Restart the Leap S3 by disconnecting it from the mains and then pressing buttons 7 and 9 on the remote control simultaneously for 20 seconds.

The Leap S3 does not directly render DTS or DD formats via the optical audio output, but the PCM format rendered enables all DTS/DD digital amplifiers to decode the signal and render this format.

In other words, the signal at the SPDIF output is given back raw, and your digital audio amplifier will decode the DD or DTS signal if it has the capacity to do so.

The Leap S3 box is designed to transmit 4K streaming platform content. You must have the corresponding subscription and the connected TV must be 4k compatible and the transmission parameters must be set to the highest 4K/2160P resolution.

The box’s default resolution is 1080P. This is because most TV models support it.

If a 4K-compatible TV is connected to the Leap S3, there will be automatic communication via HDMI between the box and the TV to determine the maximum possible resolution.

If you find that this communication via HDMI with certain TVs doesn’t work as it should, the cause may be the HDMI protocol (CEC) or an entry-level HDMI cable, which is very often the case. Resolution is then maintained at 1080P. In this case you need to go to the “Display” menu and manually select the highest resolution 4k / 2160P.

The Leap S3 IP TV box is “Google TV” certified. These ergonomic settings are locked by “Google TV” unlike “Android TV”
In fact, the Play Store is directly available on the home screen in another form. You can access it by going to “applications” where you will find your applications, the “Play store” search engine and the “Play store” suggestions.

the failure of some applications is beyond our control. Android TV application and content developers are free to make their own technological choices. The Leap S3 is Android TV certified and fully complies with the standards required by Google. Please contact the publisher of the missing application.

Go to “applications” and “your applications” go to the “Show all” icon located to the right at the end of the list, Press “OK”, the list of applications opens, The number of possible applications on the home page is limited to 12.
Select the application of your choice. Long press “OK”, a window appears, select “Move”. Then move the application icon using the arrow keys and then press “OK”

Go to “applications”, select the application of your choice. Long press “OK”, a window appears, select “show details” and confirm with “OK”, then select “Uninstall”, press “OK” and confirm.

Go to Settings / Device preferences / Keyboard / Settings / Languages / set active input mode to French

If the problem persists, please contact the keyboard manufacturer’s support department.

The Leap S3’s SD card and USB ports enable multimedia files to be played back via the media player application you choose from the Play store.  Search for “Multimedia player” in the Play store, and you’ll find a wide choice.

The SD card and USB ports can also be used to record content using an appropriate application: search for “record” in the Play store.

Many streaming applications also let you resume playback where you left off.

The USB 2.0 port supports NTFS or FAT formatted devices up to 1TO.

Via Google Play store, search for “internet web browser”. Numerous applications are available for surfing the Internet.

If a specific application is missing, it is beyond our control. Developers of Android TV applications and content are free to make their technological choices. The Leap S3 is Google TV certified and fully meets the standards required by Google. We invite you to contact the publisher of the missing application.

Limited compatibility is possible with some TV brands on certain points of the HDMI CEC protocol. To solve the problem, simply deactivate the “volume control” function.
Go to the “settings” menu / “Display and sound” / HDMI CEC / turn off the “Volume control” line

The Android 12 version takes into consideration the new European requirements in terms of energy saving. Under Android 12, USB ports are inactive by default when the device is in standby mode.

This setting can be changed as follows:

Settings / Device preferences / Power saving / set sleep mode / select “Close”